Lock Out Tag Out – LOTO / Energy Isolation

What is Lock out/Tag Out (LOTO)

What is the purpose of LOTO

Proper Steps for Energy Isolation

10 Topics

Step 1- Develop and document control procedures

Step 2- Select and Train Employees

Step Three- Prepare Machinery

Step 4- Shut Down of Machinery

Step 5- Isolation of Source Energy

Step 6- Lock and Tag Placement

Step 7- Stored Energy Release

Step 8 – Verification

Step 9-Re-Energize

Step 10 – Document Best Practice

Who needs to comply with LOTO OSHA standards?

Final Test – Energy Isolation Lock Out/Tag Out

Final Test – Energy Isolation Lock Out/Tag Out

Lock Out Tag Out – LOTO / Energy Isolation Final Test – Energy Isolation Lock Out/Tag Out

Thank you for completing the Energy Isolation course. You must pass the final exam with a 80 or above in order to receive certification.

Time limit: 0

Quiz Summary

0 of 10 questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 10 questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
1. Lockout/tagout is required anytime someone needs to remove or bypass a guard or when an employee needs to place his or her hand or other body part into a machine’s point of operation:
- Yes
- No
Correct

Incorrect
Question 2 of 10

2. Question
1. OSHA’s lockout/tagout standard requires employers to have all of the following except:
- a. Written lockout/tagout procedures
- b. Employees who are trained in the lockout/tagout procedures
- c. Periodic inspections of the lockout/tagout procedures
- d. A competent person as the Program Administrator
Correct

Incorrect
Question 3 of 10

3. Question
1. Employees who are responsible for initiating the lockout/tagout process and who physically apply locks and tags to the machines being repaired or serviced are called:
- a. Affected employees
- b. Authorized employees
- c. Plant managers
- d. Other employees
Correct

Incorrect
Question 4 of 10

4. Question
Lockout/tagout is required anytime you might be at risk for injury from the unexpected release of hazardous energy while servicing equipment, which would include:
- a. Constructing
- b. Inspecting
- c. Installing
- d. All of the above
Correct

Incorrect
Question 5 of 10

5. Question
1. Which of the following is considered an energy-isolating device?
- a. Toggle switch
- b. Machine block
- c. Push button
- d. Emergency stop
Correct

Incorrect
Question 6 of 10

6. Question
1. The lockout/tagout standard considers all of the following as forms of hazardous energy except:
- a. Steam
- b. Electrical
- c. Automation
- d. Pneumatic
Correct

Incorrect
Question 7 of 10

7. Question
OSHA requires that locks used to lock out machines being serviced or repaired are:
- Large enough so a tag can be applied to it
- b. Able to contain a clearly-worded warning
- c. Durable
- d. Both A and B are correct
Correct

Incorrect
Question 8 of 10

8. Question
1. Affected employees are individuals who may spend some of their work day in areas where machines are being serviced or repaired, but they do not operate the machines.
- a. True
- b. False
Correct

Incorrect
Question 9 of 10

9. Question
1. Locks used to lock out a machine must be provided by:
- a. Your employer
- b. You
- c. The affected employee performing the service work
- d. A licensed lock manufacturer
Correct

Incorrect
Question 10 of 10

10. Question
1. Before putting your hands or other body parts into a machine you’re about to service, all stored energy must be released, which would include:
- a. Bleeding off air pressure
- b. Draining lines
- a. Letting the machine cool down
- b. All of the above
Correct

Incorrect